Pioneer Industrial Instruments has manufactured cable trays at Sonai Industrial Estate, Pirangut — on Paud Road, 25 km from Hinjewadi — since 1994. Perforated, ladder, wire mesh, trunking and FRP trays, with the fittings, covers and supports to match, in pre-galvanised, hot-dip galvanised, powder coated, stainless steel and aluminium. Same-day delivery to Pune city and Pimpri-Chinchwad, next-day to Chakan, Talegaon, Ranjangaon and the MIDC belts, and scheduled trucks across western Maharashtra. Load tested at an NABL-accredited laboratory, with reports published on this site. UL certified; IEC 61537:2023 and NEMA VE 1 documentation supplied.
This page is for the contractor, consultant or purchase engineer who wants a cable tray manufacturer in Pune rather than a trader — someone whose plant you can drive to, whose lots carry material certificates, and who can turn a site top-up around the same day.
| Area | Localities and industrial zones | Typical projects |
|---|---|---|
| Pune city and IT corridors | Hinjewadi Phases 1–3, Wakad, Baner, Balewadi, Aundh, Kharadi, Magarpatta, Hadapsar, Viman Nagar, Kothrud, Shivajinagar | IT parks and campuses, data centres, hospitals, hotels, commercial towers, residential townships |
| Pimpri-Chinchwad and northern MIDCs | Bhosari MIDC, Pimpri, Chinchwad, Chikhali, Moshi, Chakan Phases 1–4, Talegaon MIDC, Hinjewadi Phase 3 industrial, Khed City, Shikrapur, Ranjangaon MIDC, Sanaswadi | Automotive OEM plants and tier suppliers, electronics manufacturing, engineering, warehouses, substations |
| Southern and eastern belts | Kurkumbh MIDC, Jejuri MIDC, Shirwal, Baramati MIDC, Supa–Parner, Saswad, Uruli Kanchan | Chemical and pharma units, food processing, dairy and sugar, engineering |
| Western Maharashtra and Marathwada | Satara, Karad, Kolhapur, Ichalkaranji, Sangli, Solapur; Nashik (Satpur, Ambad, Sinnar); Chhatrapati Sambhajinagar (Waluj, Shendra, Bidkin); Jalna; Ahilyanagar | Sugar and ethanol plants, textile, foundries, auto component clusters, pharma, power and water projects |
| Sector | Specification format usually seen | Pioneer supply |
|---|---|---|
| Automotive OEMs and tier suppliers — Chakan, Talegaon, Ranjangaon | IS 2062 / IS 513 material, IS 4759 hot-dip galvanising, load-deflection clause; NEMA VE 1 and NEC 392 where the parent company is American or the line is built by a US integrator. | HDG perforated and ladder, powder-coated trays colour-coded by service, trunking for control cabling; NEMA load data where required. |
| IT parks and data centres — Hinjewadi, Kharadi, Magarpatta, Talegaon | IEC 61537 or BS EN 61537 on consultant specs; NEMA VE 1, UL and wire mesh in data halls on US-owned facilities. | Wire mesh 4–6 mm, pre-galvanised and powder coated perforated, aluminium ladder; see the data centre page. |
| Pharma, biotech and food — Hinjewadi, Kurkumbh, Shirwal, Baramati | SS 304L / 316L with GMP finish in process areas; HDG in utilities; IEC 61537. | Stainless perforated and ladder with 2B or pickled finish, HDG utility trays, material certificates per lot. |
| Sugar, ethanol and distilleries — Satara, Kolhapur, Sangli, Solapur | IS-based, heavy-duty ladder for boiler and turbine houses, HDG for outdoor racks, covers in dusty areas. | HDG ladder 2.5–3.0 mm with 150 mm rails, covers, supports; witness inspection before dispatch. |
| Chemical and specialty — Kurkumbh, Ranjangaon, Shendra | HDG 85 µm and above, SS 316L or FRP in corrosive areas; IEC 61537 on MNC sites. | HDG, SS 316L and FRP perforated and ladder; coating readings per lot. |
| Public sector and infrastructure — Metro, water, power, defence | Tender specifications on IS 2062, IS 277, IS 4759, with test certificates and third-party inspection. | Full tender documentation: material certificates, galvanising reports, dimensional reports, inspection and test plan. |
Perforated trays from 50 to 300 mm wide were load tested to failure at Chakan Testing and Research Lab, Pune (ISO/IEC 17025:2017, NABL TC-8638) in October 2024 with deflection recorded at every step, together with zinc coating thickness and uniformity, adhesion, salt spray, tensile, chemical and bend tests on the same samples; every tested section exceeds NEMA VE 1 class 8C working load at a 1.5 safety factor and stays within the IEC 61537 deflection limit. Download the laboratory reports (PDF, 19 pages); the data is tabulated on the IEC 61537 page. Material test certificates (EN 10204 3.1) and galvanising readings are issued with every lot; Pioneer's Certificate of Compliance to NEMA VE 1, declaration to IEC 61537:2023 and UL documentation are provided at submittal stage.
Standard perforated, ladder and wire mesh sizes in GI and hot-dip galvanised finish leave the Pirangut plant the same working day for Hinjewadi, Wakad, Baner, Pimpri-Chinchwad and the city, and next working day for Chakan, Talegaon, Ranjangaon, Kurkumbh and Shirwal. A contractor who confirms a top-up order by noon usually has it on site before the evening shift. Made-to-order sizes, stainless steel and aluminium take two to three weeks.
Yes. The plant is at Sonai Industrial Estate on Paud Road, Pirangut, about 25 km from Hinjewadi and 40 minutes from Chakan. Consultants, EPC engineers and client inspectors visit for vendor assessment, witness inspection of a lot before dispatch, and to see galvanising thickness and dimensional checks done. Call ahead and we schedule the visit around the production run you want to see.
Traders in Pune stock a few standard GI sizes bought from whoever is cheapest that month, with no material certificates and no test data. Pioneer makes every tray from steel bought with mill certificates, galvanises after fabrication, issues EN 10204 3.1 certificates and coating readings per lot, and publishes NABL laboratory test reports on this site. For a one-off GI length either will do; for a project that will be inspected, the difference is the paperwork and the consistency.
Perforated and ladder trays are priced per running metre by width, flange or rail depth, sheet thickness and finish; hot-dip galvanised items are often quoted per kilogram because the galvanising cost follows weight. Fittings, covers, splice plates and supports are priced per piece. Send the BOQ or drawings and we return an itemised quotation; for Pune sites the delivery charge is quoted separately and is small.
Automotive plants at Chakan, Talegaon and Ranjangaon, and PSU and infrastructure tenders, specify IS 2062 / IS 513 material, IS 277 pre-galvanised or IS 4759 hot-dip galvanising and a load-deflection clause. IT parks and data centres in Hinjewadi, Kharadi and Magarpatta increasingly specify IEC 61537 or, where the owner is a US company, NEMA VE 1 and UL. Pharma and food plants ask for SS 304L or 316L with GMP finish. Pioneer quotes against all of these with the matching documentation.
Yes. Ongoing sites in Pune call for 20 or 50 metres and a handful of bends; those go out with the next scheduled run, often the same day. There is no minimum order within Pune district.
Send your BOQ, drawings or the consultant's specification and we will return a quotation with a delivery programme, usually the same day.
Email info@pioneerinstrumentation.com | Call or WhatsApp +91 93700 39974 | Request a quote
Pioneer Industrial Instruments, Plot No. 5, Gat No. 107/B, Sonai Industrial Estate, Paud Road, Pirangut, Pune 412115, Maharashtra. Manufacturing cable trays since 1994.
Related pages: Cable trays for Mumbai, Navi Mumbai and Thane | Cable trays for data centres in India | Perforated cable trays | Ladder type cable trays | FRP cable trays