South-East Asian projects are specified by consultants trained in British, American and international practice, often on the same site. Pioneer supplies one range that answers all three, made in one plant in Pune and shipped from the nearest major container port, Nhava Sheva.
Standards commonly specified in South-East Asia
| Market | How cable tray usually appears in the specification | Project cities we supply |
|---|---|---|
| Singapore | British-derived codes; BS EN 61537 on data centre, pharma and commercial projects; NEMA VE 1 and UL on US-designed data centres. | Singapore, Jurong, Tuas |
| Malaysia | British-derived codes; BS EN 61537 on data centre, pharma and commercial projects; IEC 61537 on international EPC specifications. | Kuala Lumpur, Johor Bahru, Penang, Kuantan |
| Indonesia | IEC 61537 on consultant and international EPC specifications; NEMA VE 1 on US-format oil, gas and data-centre projects. | Jakarta, Surabaya, Batam |
| Thailand | IEC 61537 on consultant and EPC specifications; NEMA VE 1 on US-designed projects. | Bangkok, Rayong |
| Vietnam | IEC 61537 on international consultant and EPC specifications; NEMA VE 1 on US-designed projects. | Ho Chi Minh City, Hanoi, Haiphong |
| Philippines | NEMA VE 1 on US-format specifications; IEC 61537 on international EPC projects. | Manila, Cebu |
Whatever the format, the consultant wants the same evidence: safe working load at the support span, deflection at that load, corrosion class and electrical continuity. Our IEC 61537:2023 page explains the tests and publishes the results; BS EN 61537 and NEMA VE 1 have their own pages.
What we ship
| Tray type | Materials and finishes | Typical application |
|---|---|---|
| Ladder | Hot-dip galvanised after fabrication (ASTM A123 / ISO 1461 / IS 4759); pre-galvanised (IS 277 / EN 10346); aluminium; SS 304 / 316L. Side rails 50, 75, 100 and 150 mm; 2.0–3.0 mm. | Pipe racks, substations, refineries, power plants, long spans |
| Perforated | HDG, pre-galvanised, powder coated, aluminium, SS 304 / 316L. Side rails 38, 50, 75 and 100 mm; 1.5–2.5 mm. | Buildings, hospitals, pharma, data centres, utility areas |
| Wire mesh | Electro-zinc, HDG, SS 304L / 316L. | Data halls, telecom, instrumentation and control cabling |
| FRP (supplied) | Glass-fibre reinforced polyester, UV-stabilised. | Chemical plants, desalination, water treatment |
Every type comes with matching bends, tees, crosses, reducers, covers, splice plates and supports in the same finish. Drip trays for data-centre pipework and AHUs ship in the same container — see drip trays.
Choosing a finish for tropical and coastal sites
- Air-conditioned indoor areas — pre-galvanised GI or electro-zinc wire mesh.
- Outdoor, humid and industrial areas — hot-dip galvanised after fabrication. See HDG cable trays.
- Coastal, marine-facing and chloride-exposed sites — SS 316L. See SS 316L cable trays.
- Chemical and water-treatment plants — FRP or SS 316L.
Documents supplied for export
- NABL-accredited laboratory test reports (published PDF), Pioneer’s declaration of conformity to IEC 61537:2023 and Certificate of Compliance to NEMA VE 1.
- Data sheets, dimensions and load tables; GA drawings for approval.
- EN 10204 3.1 material test certificates per lot, for steel, stainless and aluminium.
- Hot-dip galvanising coating thickness readings per lot.
- Per shipment: commercial invoice, packing list, certificate of origin, and the inspection release where a third party has inspected.
Shipping, packing and inspection
- Terms: FOB Nhava Sheva (JNPT, Mumbai), Incoterms 2020; CFR / CIF to the nearest port on request.
- Lead time: a 20-foot container of standard sizes is normally ready two to three weeks after drawing approval, subject to galvanising and inspection scheduling.
- Packing: bundled and palletised with edge protection and strapping for sea freight; fittings and hardware boxed and labelled per packing list.
- Marking: each length permanently marked with make, size, thickness, material / finish and lot number.
- Inspection: SGS, Bureau Veritas, Intertek, TÜV or your own inspector are welcome at the Pirangut plant, with the inspection and test plan shared in advance.
Tell us the destination and HS code at enquiry stage so the import paperwork is aligned before production starts.
Why Pioneer
An export order needs a manufacturer, not a trader: one plant, one set of test reports, and the same tray in the last container as in the first.
- UL certified cable trays, declared to IEC 61537:2023 and load tested for NEMA VE 1.
- Tested at an NABL-accredited laboratory — load–deflection, zinc coating, salt spray, tensile and chemical reports are published as a PDF.
- Manufacturing since 1994 at our own plant in Pirangut, Pune, which turns out up to 8,000 metres of tray a day.
- Supply across India by road from Pune, and export FOB Nhava Sheva (JNPT, Mumbai).
- Quotation within 24 hours of your BOQ, with the data sheet your consultant needs.